Exemplo de arquivo multipath.conf para storage IBM DS3,4,5000
Sample file to multipath.conf to IBM DS3,4,500 storage
defaults {
udev_dir /dev
polling_interval 2
default_getuid_callout "/sbin/scsi_id -g -u -s /block/%n"
user_friendly_names yes
bindings_file "/etc/multipath/bindings"
}
devnode_blacklist {
wwid 360026b90507ccb0000aa8d90999df333
devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*"
devnode "^hd[a-z][[0-9]*]"
devnode "^cciss!c[0-9]d[0-9]*[p[0-9]*]"
}
devices {
device {
vendor "IBM"
product "1814 FAStT"
getuid_callout "/sbin/scsi_id -g -u -s /block/%n"
prio_callout "/sbin/mpath_prio_rdac /dev/%n"
features "0"
hardware_handler "1 rdac"
path_grouping_policy group_by_prio
failback immediate
rr_weight uniform
no_path_retry queue
rr_min_io 1000
path_checker rdac
}
}
multipaths {
multipath {
wwid 3600a0b8000510fde000005e14b4d828a
alias alias_name1
}
multipath {
wwid 3600a0b8000510fa0000003344b4d81fa
alias nome_do_alias
}
multipath {
wwid 3600a0b8000510fde000005df4b4d823d
alias myspace
}
multipath {
wwid 3600a0b8000510fa00000032e4b4d7e4d
alias meudisco
}
}
Mostrando postagens com marcador IBM - Storage Subsystem. Mostrar todas as postagens
Mostrando postagens com marcador IBM - Storage Subsystem. Mostrar todas as postagens
quarta-feira, 29 de setembro de 2010
sexta-feira, 5 de março de 2010
Trocando discos com defeitos no IBM DS4700 - Change fail drive on IBM DS4700
Após trocado o disco com defeito, vamos realocar o disco para o array e liberar o disco de HotSpare.
Então, abra o Storage Manager clique no menu superior em Array>Replace Drives...
Aguarde e pronto.
Então, abra o Storage Manager clique no menu superior em Array>Replace Drives...
Aguarde e pronto.
After replaced the failed disk, we will reallocate the disk to the array and free the disk Hotspare.Then, open the Storage Manager click on the top menu in Array> Replace Drives ...Wait and ready.
terça-feira, 8 de dezembro de 2009
Configurando multipath para IBM DS4000 com Red Hat Enterprise 5.2 - Configuring multipath IBM Storage DS4000 on Linux Red Hat Enterprise 5.2 or later
Depois de fazer o zining e de entregar as LUN's para o host, vamos configurar o multipath no linux Red Hat Enterprise 5.2 ou superior.
After done zoning and assign LUN's to host, configure the multipath on Linux Red Hat Enterprise Linux 5.2 or later is very easy.
Altere o arquivo /etc/multipath.conf
change the file /etc/multipath.conf
remova o # das linhas comentadas.
remove the # of the lines commented.
Original:
#defaults {
# udev_dir /dev
# polling_interval 10
# selector "round-robin 0"
# path_grouping_policy multibus
# getuid_callout "/sbin/scsi_id -g -u -s /block/%n"
# prio_callout /bin/true
# path_checker readsector0
# rr_min_io 100
# rr_weight priorities
# failback immediate
# no_path_retry fail
# user_friendly_name yes
#}
Alterado:
Changed:
defaults {
udev_dir /dev
polling_interval 2
default_getuid_callout "/sbin/scsi_id -g -u -s /block/%n"
user_friendly_names yes
}
Original:
#devnode_blacklist {
# wwid 26353900f02796769
# devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*"
# devnode "^hd[a-z]"
#}
Alterado:
Changed:
devnode_blacklist {
devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*"
devnode "^hd[a-z][[0-9]*]"
devnode "^cciss!c[0-9]d[0-9]*[p[0-9]*]"
devnode "sda"
}
Original:
#devices {
# device {
# vendor "COMPAQ "
# product "HSV110 (C)COMPAQ"
# path_grouping_policy multibus
# getuid_callout "/sbin/scsi_id -g -u -s /block/%n"
# path_checker readsector0
# path_selector "round-robin 0"
# hardware_handler "0"
# failback 15
# rr_weight priorities
# no_path_retry queue
# }
# device {
# vendor "COMPAQ "
# product "MSA1000 "
# path_grouping_policy multibus
# }
#}
Alterado:
Changed:
devices {
device
{
vendor "IBM"
product "1814 FAStT"
path_grouping_policy failover
path_checker tur
path_selector "round-robin 0"
prio_callout "/sbin/mpath_prio_rdac /dev/%n"
failback immediate
features "1 queue_if_no_path"
no_path_retry 300
}
}
multipaths {
multipath {
wwid 3600a0b8a1048b82a0121a3a586051497
alias disco_de_dados
}
}
Execute os comandos abaixo para que as configurações seam mantidas depois do reboot.
Run the commands to enable the configs after the reboot.
root@howtomeinfo# chkconfig multipathd on
root@howtomeinfo# service multipathd start
Feito
Done
After done zoning and assign LUN's to host, configure the multipath on Linux Red Hat Enterprise Linux 5.2 or later is very easy.
Altere o arquivo /etc/multipath.conf
change the file /etc/multipath.conf
remova o # das linhas comentadas.
remove the # of the lines commented.
Original:
#defaults {
# udev_dir /dev
# polling_interval 10
# selector "round-robin 0"
# path_grouping_policy multibus
# getuid_callout "/sbin/scsi_id -g -u -s /block/%n"
# prio_callout /bin/true
# path_checker readsector0
# rr_min_io 100
# rr_weight priorities
# failback immediate
# no_path_retry fail
# user_friendly_name yes
#}
Alterado:
Changed:
defaults {
udev_dir /dev
polling_interval 2
default_getuid_callout "/sbin/scsi_id -g -u -s /block/%n"
user_friendly_names yes
}
Original:
#devnode_blacklist {
# wwid 26353900f02796769
# devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*"
# devnode "^hd[a-z]"
#}
Alterado:
Changed:
devnode_blacklist {
devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*"
devnode "^hd[a-z][[0-9]*]"
devnode "^cciss!c[0-9]d[0-9]*[p[0-9]*]"
devnode "sda"
}
Original:
#devices {
# device {
# vendor "COMPAQ "
# product "HSV110 (C)COMPAQ"
# path_grouping_policy multibus
# getuid_callout "/sbin/scsi_id -g -u -s /block/%n"
# path_checker readsector0
# path_selector "round-robin 0"
# hardware_handler "0"
# failback 15
# rr_weight priorities
# no_path_retry queue
# }
# device {
# vendor "COMPAQ "
# product "MSA1000 "
# path_grouping_policy multibus
# }
#}
Alterado:
Changed:
devices {
device
{
vendor "IBM"
product "1814 FAStT"
path_grouping_policy failover
path_checker tur
path_selector "round-robin 0"
prio_callout "/sbin/mpath_prio_rdac /dev/%n"
failback immediate
features "1 queue_if_no_path"
no_path_retry 300
}
}
multipaths {
multipath {
wwid 3600a0b8a1048b82a0121a3a586051497
alias disco_de_dados
}
}
Execute os comandos abaixo para que as configurações seam mantidas depois do reboot.
Run the commands to enable the configs after the reboot.
root@howtomeinfo# chkconfig multipathd on
root@howtomeinfo# service multipathd start
Feito
Done
Assinar:
Postagens (Atom)
